Data Recovery Expert Services Canada 2017 (C)
WE CAN HELP WHERE OTHERS CAN'T !
for service support
Local Lab Alberta Calgary : +1(403) 889-7071
Local Lab Vancouver BC : +1(604) 738-6089
For Service in Toronto call : +1(403) 889-7071
The basic malfunctions and methods for restoring hard drives
Unreadable sectors of a hard disk. The normal operation with bad sectors on the hard drive (bad blocks) or clusters that are marked as such in the file system structures, can not be guaranteed or not possible at all. All this strongly decreases the speed of reading, the computer produces errors, blue screen, freezes. Magnetic heads getting on the bad sector can not correctly write or read on this part. This problem is inherent in almost all models of hard drives in one degree or another. HDD Recovery is performed by reading a full copy of the hard drive on the hardware-software equipment with error correction.
Malfunction of the magnetic heads. Drive makes clicking or intermittent crackle in some models, after some time can stop the engine. The fault occurs after shocks or falls in the running. Constant clicking indicates that it is not able to read the marking, drive does not go to the operating mode and constantly recalibrate. In this case it is necessary to replace the head assembly. Restoration is performed in a "clean room", by replacing the magnetic heads with another serviceable donor disc.
Hard drive engine wedge (stuck,seizure). Wedge is often found on Toshiba and Seagate drives with three or more plates. It also happens with laptop hard drives. In the case of the engine wedge there are two ways of repairing:
the axis of the motor shaft can clog the end of the bearing lock washer or axle shaft wedge on the surface of the bearing bush. In this case, the motor shaft does not spin, sometimes utters quiet humming sounds. The hard disk drive restoring is made by a permutation of wedging bearing platters with another, non-defective, from the donor, followed by centering and calibrate platters.
Failure of the electronics board. This damage cause the burning of an electronic board components and controller chip. Engine will not start, it makes no sound, sometimes there is a smell of burning. This happens because of the burning board elements caused by electrical breakdown, malfunction of the computer power supply, wrong polarity power to the hard disk. For repairing and restoration data of the hard drive we replace electronics board transplanted from the same disk - donor, solder it or rewrite the ROM controller.
The failure of the head switch. The serial head switch is located on the magnetic head block and serves to amplify the signal coming from the heads to the controller. Failure of the switch is the result of the electronics board damage. A hard disk is structured so that a separate exchange or soldering of a switch-preamp is physically impossible. Restore your hard disk drive to the operating state is performed by replacing the whole unit from a donor HDD.
Magnetic heads sticking. Happens in the event of an impact or fall, sometimes when power is off. The magnetic heads do not have time to move into the parking area and adhere to the surface. It often happens with compact models - HDDs sizes 1.8 ", 2.5" or external USB cases as a result of a fall or blow, but can occur without external influences on the HDD. Repairing is made by using pullers and special tools with heads placed in the parking area; in case of heads damage and inability of reading the disc we replace them.
If the hard drive is not detected by the system, makes clicking sound or other extraneous sounds, and it has valuable information, to prevent damaging of the plate's surface it is strongly recommended not to use the drive. In such cases, the first thing you need to do is to restore the mechanics of the hard drive to the operating state, and after using equipment from Seagate or WD manufacture read a sector-based copy of a disk. Only in this way you can recover the information completely.
Data Recovery Process from hard disk drive (HDD)
Data recovery expert provides professional data recovery in British Columbia and Alberta provinces from hard drives after any logical and physical damages, as well as after an accidental deletion or formatting.
We can restore data in next cases:
Data recovery from all hard drive interfaces types models and sizes.
WD Western Digital USB external dropped damaged data recovery service.
Seagate External internal hard drive damaged data recovery.
Data recovery in case all types error and failure like: logical physical electrical and mechanical.
Data recovery from computer and server hard drive all form factor interfaces and sizes.
Data repair and file recovery from all type computer operation system and logical partition, and any types data files and formats. (Photo, movies, pictures, sound files and music, windows settings and passwords , backup files, all data base, all e-mail data base)
If your hard drive or laptop dropped or electrical burned, hard drive have firmware malfunction, head crashed or more we can help !
And many other different and difficul cases. Just call us or write and usk about your device.
Next more about our capabilities.
We can retrieve information with many logical and physical damages or hard disk errors.
Restore data from all known external and internal drives, and with all known standards and compounds.
Recover data from the hard drives of computers, laptops, servers, and many other devices.
Extensive experience and advanced equipment. Certified engineers.
If you accidentally delete your data, formatted or reinstalled the operating system, then it is a logical problem.
If your hard drive is not detected or the computer makes strange banging whirring sounds, it is a physical problem.
In any case, we will make every effort to recover your data even if your hard drive was in another data recovery service. This is called the second attempt. Please read more below.
Restoration from any hard drives brand and models! Our lab specialists are the experts in the field of data recovery from hard drives: Seagate, Western Digital, Samsung, Hitachi, Toshiba, Fujitsu, Maxtor, IBM. We provide a full range of data recovery services. We work with hard drives IDE, SATA, SAS, SCSI from computers and laptops to servers and industrial stations.
Data Recovery as soon as possible! Our large warehouse of donors allows us not waste time looking for parts, and immediately begin to fulfill the order. All the work with the disk occurs on manufacture equipment, special developed tool, hardware and software. We use only non-destructive processes of reading information from the hard drive.
We work with all file systems: FAT16, FAT32, eXFAT, NTFS, NNWFS, NSS, HFS, HFS +, EXT2, EXT3, EXT4, UFS, UFS2. We have ready-made solutions for all types of existing file systems.
Data Recovery HDD with logical and physical fault
All the hard drive faults can be divided into logical and physical.
Logical - the hard drive is OK, but the data is inaccessible or lost, for example, file system damage, errors in the service area of
the drive, as well as accidentally deleting files or formatting partitions. Recovery is performed with the help of special software utilities. Error correction is performed on special equipment, without opening the drive.
Physical - the drive does not operate normally, is not determined by the computer, makes sounds, clicks, squeaks or no signs of life. These breakdowns indicate the failure of the mechanics or electronics components of the disc. Recovery begins with a set of measures to bring the hard drive to the operating state. Reading errors are corrected after the replacement of defective components using the direct reading software-hardware tools and imaging sector by sector after writing the modified firmware on the drive.